Specifications – PD Dante Audio Monitoring Unit

1      Monitoring of 64 Dante channels at 48kHz (32 channels at 96kHz)

2      Output up to 64 Dante channels at 48kHz (32 channels at 96kHz)

3      Sample rates supported

·      44.1kHz

·      48kHz

·      88.2kHz

·      96kHz

4      Bit Depth supported

·      16bit

·      24bit

·      32bit

5      AES67 compatible

6      Fully compatible with New Dante Domain Manager

7      Two main modes of operation

·      User defined mix to L and R output

–      8 User memories with customizable names

·      PFL mode where selected channel is sent to LR with two modes

–      Auto cancel previous selection

–      Additive with Clear button

8      64 channel meters

·      High resolution meters

·      Optional Peak indicator with user definable trigger level

9      Main LR meters

·      Large high-resolution meters displaying 0dBFS down to -60dBFS in 1dB steps

·      Optional Peak hold

·      Optional Working level indicator with user definable level

10   Internal 2W/channel amplifier feeding either

·      2x Internal speakers

·      Headphone output

11   Dual Balanced Line Outputs 0dBFS = +21dBu maximum output into 600ohms on 15way D-type connector

·      Fed from main Stereo LR bus

·      Option to follow main volume control

·      User adjustable trim (0dB to -60dB in 1dB steps)

·      Output Mute relays

12   Stereo AES output on 15way D-type connector

·      Fed from main Stereo LR bus

·      Option to follow main volume control

·      User adjustable trim (0dB to -60dB in 1dB steps)

13   Stereo AES Input on 15way D-type connector

·      User selectable routing to Dante output(s)

14   Stereo unbalanced line input on 3.5mm stereo jack

·      with input level trim control suitable for use with common music playback devices such as, iPods, iPhones, MP3 players

·      max input level +8.5dBu

15   3.5mm Headphone socket and microphone input

·      Headphone output for driving loads from 8ohm to 600ohm

·      Microphone input with gain control (up to 40dB) and level trim

·      Socket wiring is suitable for use with most common mobile phone headsets

16   Dual 1Gbps RJ45 Dante inputs

·      1Gbps or 100Mbps operation

·      User configurable for Switched or Redundant operation

·      Network configuration information available via menu

17   Power input via

·      PoE (13W) on Primary RJ45 connector

·      USB input (1.5A) auto negotiates with connected USB port

–      Direct from Mac/PC USB connector capable of delivering 1.5A

–      USB mains adaptor

–      USB battery pack

·      Both power inputs can be active at the same time for redundancy

18   USB port is also used for product firmware updates

19   Wired remote control option on 15way D-type connector

·      RS485 balanced TX and RX pairs

·      5V feed to connected device (up to 300mA)

20   Internal oscillator with selectable routing to Dante output(s) and level control

·      Sine/Square/Triangle Wave generation settable to a frequency of 50Hz, 100Hz, 200Hz, 500Hz, 1kHz, 2kHz, 5kHz and 10kHz

·      White Noise Generator

·      Pink Noise Generator

21   LCD

·      5.0” (127mm) diagonal 24bit colour LCD with 800xRGBx480 resolution

·      LED backlight (adjustable brightness via software)

·      5-point touch capacitive touch overlay with gesture support

22   Size

·      173mm long by 106mm wide by 34mm height

·      0.5kG

·      Optional mounting brackets

23   Optional Case

24   Optional breakout connector for 15way D-type connector