1 Monitoring of 64 Dante channels at 48kHz (32 channels at 96kHz)<\/p>\n\n\n\n
2 Output up to 64 Dante channels at 48kHz (32 channels at 96kHz)<\/p>\n\n\n\n
3 Sample rates supported<\/p>\n\n\n\n
\u00b7 44.1kHz<\/p>\n\n\n\n
\u00b7 48kHz<\/p>\n\n\n\n
\u00b7 88.2kHz<\/p>\n\n\n\n
\u00b7 96kHz<\/p>\n\n\n\n
4 Bit Depth supported<\/p>\n\n\n\n
\u00b7 16bit<\/p>\n\n\n\n
\u00b7 24bit<\/p>\n\n\n\n
\u00b7 32bit<\/p>\n\n\n\n
5 AES67 compatible<\/p>\n\n\n\n
6 Fully compatible with New Dante Domain Manager<\/p>\n\n\n\n
7 Two main modes of operation<\/p>\n\n\n\n
\u00b7 User defined mix to L and R output<\/p>\n\n\n\n
– User memories with customizable names<\/p>\n\n\n\n
\u00b7 PFL mode where selected channel is sent to LR with two modes<\/p>\n\n\n\n
– Auto cancel previous selection<\/p>\n\n\n\n
– Additive with Clear button<\/p>\n\n\n\n
8 64 channel meters<\/p>\n\n\n\n
\u00b7 High resolution meters<\/p>\n\n\n\n
\u00b7 Optional Peak indicator with user definable trigger level<\/p>\n\n\n\n
9 Main LR meters<\/p>\n\n\n\n
\u00b7 Large high-resolution meters displaying 0dBFS down to -60dBFS in 1dB steps<\/p>\n\n\n\n
\u00b7 Optional Peak hold<\/p>\n\n\n\n
\u00b7 Optional Working level indicator with user definable level<\/p>\n\n\n\n
10 Internal 25W\/channel amplifier feeding either<\/p>\n\n\n\n
\u00b7 2x 63.5mm full range drivers in optimized ported cabinets<\/p>\n\n\n\n
\u00b7 Headphone output<\/p>\n\n\n\n
11 Dual Balanced Line Outputs 0dBFS = +21dBu maximum output into 600ohms 2x 3pin male XLR connectors<\/p>\n\n\n\n
\u00b7 Fed from main Stereo LR bus<\/p>\n\n\n\n
\u00b7 Option to follow main volume control<\/p>\n\n\n\n
\u00b7 User adjustable trim (0dB to -60dB in 1dB steps)<\/p>\n\n\n\n
\u00b7 Output Mute relays<\/p>\n\n\n\n
12 Stereo AES output on 3pin male XLR connector<\/p>\n\n\n\n
\u00b7 Fed from main Stereo LR bus<\/p>\n\n\n\n
\u00b7 Option to follow main volume control<\/p>\n\n\n\n
\u00b7 User adjustable trim (0dB to -60dB in 1dB steps)<\/p>\n\n\n\n
13 Stereo AES Input on 3pin female XLR connector<\/p>\n\n\n\n
\u00b7 User selectable routing to Dante output(s)<\/p>\n\n\n\n
14 Stereo unbalanced line input on 3.5mm stereo jack<\/p>\n\n\n\n
\u00b7 with input level trim control suitable for use with common music playback devices such as, iPods, iPhones, MP3 players<\/p>\n\n\n\n
\u00b7 max input level +8.5dBu<\/p>\n\n\n\n
15 3.5mm Headphone socket and microphone input<\/p>\n\n\n\n
\u00b7 Headphone output for driving loads from 8ohm to 600ohm<\/p>\n\n\n\n
\u00b7 Microphone input with gain control (up to 40dB) and level trim<\/p>\n\n\n\n
\u00b7 Socket wiring is suitable for use with most common mobile phone headsets<\/p>\n\n\n\n
16 Dual 1Gbps RJ45 Dante inputs<\/p>\n\n\n\n
\u00b7 1Gbps or 100Mbps operation<\/p>\n\n\n\n
\u00b7 User configurable for Switched or Redundant operation<\/p>\n\n\n\n
\u00b7 Network configuration information available via menu<\/p>\n\n\n\n
17 Power input<\/p>\n\n\n\n
\u00b7 NIX00537<\/p>\n\n\n\n
– 2x IEC mains socket<\/p>\n\n\n\n
– 90-250V 50-60Hz mains input<\/p>\n\n\n\n
– Both power inputs can be active at the same time for redundancy<\/p>\n\n\n\n
\u00b7 NIX00537DC<\/p>\n\n\n\n
– Alternate version NIX00537DC has 2x 2.1mm DC inputs sockets in place of the 2x IEC mains inputs and must be powered via an external 24V 2Amp DC adaptor(s)<\/p>\n\n\n\n
– Adaptors not supplied<\/p>\n\n\n\n
– Both power inputs can be active at the same time for redundancy<\/p>\n\n\n\n
18 USB port is used for product firmware updates<\/p>\n\n\n\n
19 Internal oscillator with selectable routing to Dante output(s) and level control<\/p>\n\n\n\n
\u00b7 Sine\/Square\/Triangle Wave generation settable to a frequency of 50Hz, 100Hz, 200Hz, 500Hz, 1kHz, 2kHz, 5kHz and 10kHz<\/p>\n\n\n\n
\u00b7 White Noise Generator<\/p>\n\n\n\n
\u00b7 Pink Noise Generator<\/p>\n\n\n\n
20 LCD<\/p>\n\n\n\n
\u00b7 5.0\u201d (127mm) diagonal 24bit colour LCD with 800xRGBx480 resolution<\/p>\n\n\n\n
\u00b7 LED backlight (adjustable brightness via software)<\/p>\n\n\n\n
\u00b7 5-point touch capacitive touch overlay with gesture support<\/p>\n\n\n\n
21 Size<\/p>\n\n\n\n
\u00b7 494mm wide by 300mm deep by 88mm height<\/p>\n\n\n\n
\u00b7 7.5kG<\/p>\n\n\n\n
22 19inch rack mounting ears can be removed for desktop use<\/p>\n","protected":false},"excerpt":{"rendered":"
1 Monitoring of 64 Dante channels at 48kHz (32 channels at 96kHz) 2 Output up to 64 Dante channels at ...<\/p>","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"extendify_custom_stylesheet":"","_mi_skip_tracking":false,"footnotes":""},"yoast_head":"\n